Safety Boots
Safety Boots

Rigger Boots

V12 Lynx Rigger Boot VR696
Wide fitting composite toe cap.
Composite anti penetration mid-sole.
Scuff / bump cap.

Full grain supple cow hide upper with water repellent finish.
Pull on loops.
Pneumatic back for comfort when flexing.
Padded ankle protector and anti torsion heel support.

A clever combination of 3 densities of polyurethane and Rubber. Ensures high slip, heat and abrasion resistance as well as comfort. Multi-directional tread ensures good traction in a variety of conditions.
Heat resistant to approximately 300ºC.

These supple safety boots were developed for the offshore industry where it has been trialled and tested. It is completely metal free to remove dangers of sparking and reduce weight.
Ladder grips and an anti torsion heel support add to the safety features.
The special cut to the top and pneumatic collar
provide superb comfort when flexing the leg.

Conforms to: ENISO 20345:2004 SRC S3

Size 5 - 13

Jallatte J0266 Rigger Boot

Sizes 3-13.
The Jalaska is an industry benchmark when it comes to mens rigger boots, renowned for its tough resilience in harsh environments both on and off shore, it is constructed from natural full grain oil and water repellent leather.
Approved to EN345-S3 CI HRO - See more at: http://www.outlandsales.co.uk/product.php/238/jallatte_jalaska_soft_leather_rigger_boot#sthash.ANlz9vec.dpuf
Jalaska rigger boot uses a unique AP23 tan leather upper for water resistance. Dual density Softane sole. Steel toe cap to EN345 and pierce resistant steel midsole. If you require this rigger boot in large quantities please contact us for more info. We are experienced in bulk orders and exports to oil / gas producing regions.
Features with the Jallatte Jalaska Rigger Boot with Steel Toe Cap and Midsole

UPPER: AP23™ leather. Oil-and water-repellent. It is 10% to 15% thicker than most leathers used for safety footwear (2,4mm)
FRONT FOOT LINING: Non-woven fabric
TOE CAP: Aérfort 200J, perforated steel toe cap. Jallatte® exclusivity
FOOTBED: Confort-Tech: anatomic, antibacterial, shock absorber in the heel are
MIDSOLE: Steel
SOLE: Softane™ dual density PU with progressive heel shock absorber
NORM: EN 345-1. Anti-static

SIZES: 36-48 3 - 13

Sizes 3-13.
The Jalaska is an industry benchmark when it comes to mens rigger boots, renowned for its tough resilience in harsh environments both on and off shore, it is constructed from natural full grain oil and water repellent leather.
Approved to EN345-S3 CI HRO - See more at: http://www.outlandsales.co.uk/product.php/238/jallatte_jalaska_soft_leather_rigger_boot#sthash.ANlz9vec.dpuf

Cofra New York II Rigger Boots

Beige water repellent grain leather boot, Unlined, antistatic, anti-shock, slipping resistant, non metallic APT Plate midsole. Plus: Footwear completely free from metal parts. METATARSAL SUPPORT GEL footbed, made of soft PU, removable; Outsole resistant to +300°C (1 minute contact).
Upper. Water repellent full grain leather
Lining. Unlined
Footbed. Metatarsal Support Gel, made of soft PU, full piece, antistatic, anatomic, removable, covered with cloth. The soft gel insert in the metatarsal area guarantees stability and comfort even on uneven surfaces. Cold and heat insulation
Outsole. PU/Nitrile rubber resistant to + 300°C (1 minute contact)
Plus. non metallic APT Plate – Antiperforation Textile, non metallic TOP RETURN toe cap
Width. 11 Mondopoint
Safety Rating S3 - HRO SRC
Sizes 6-13 39-48


100% Metal Free.
Non Metallic S3 HRO SRC.
Sizes 6-12.
Water repellent grain leather.
PU/Nitrile resistant to + 300°C.
Width - 11 Mondopoint.

Footbed - Metatarsal support gel, made of soft PU, full piece, antistatic, anatomic, removable, covered with cloth. The soft gel insert in the metatarsal area guarantees stability and comfort even on uneven surfaces. Cold and heat insulation.

Safety Rating S3 - HRO SRC. - See more at: http://www.outlandsales.co.uk/product.php/4078/cofra_new_york_unlined_rigger_boot#sthash.bggvumdN.dpuf

ST Rigger Boot 9050

Our tan leather Rigger Boots are a favourite amongst construction industry workers. With their mid-calf length and optional fleece lining, these boots provide optimum warmth even on the chilliest of days.

  • BS EN ISO 20345:2004/A1:2007 S1P SRC
  • 200 joule steel safety toe cap
  • Penetration resistant steel midsole
  • Tan grain leather
  • Fur liner
  • Dual density PU oil resistant sole
  • Anti-slip & antistatic sole
  • Energy absorbing heel
  • Pull-on loops
Sizes: 5 - 13

Contact Us Today:

North East Rig Out Ltd
Unit 3, Altens Trade Centre

Hareness Circle

Altens Industrial Estate

Aberdeen

AB12 3LY


TEL: +44 1224 878887

FAX: +44 1224 878878

sales@nerigout.com

 

Or use our contact form.

Get Social with Us

Sign up for our Newsletter

Print Print | Sitemap
© North East Rig Out Ltd 2018 All Rights Reserved